BooksBritish Standards
Chemical Composition and Mechanical / Physical Properties Of En-1, En-1A & En-1B With Books
En1 Is A British Standard Grade. En-1 Comes From British Standa / BS 970. This Is A bright Mild Steel. According to Bs 970/1955. En-1 has two parts. (1. En-1 A And 2. En-1B)
- En – 1A
- En – 1B
En1A has 5 (Five) Chemical Elements. There Normalized Conditions For Mechanical / Physical Properties.
Also En1B has 5 (Five) Chemical Elements. And there Normalized Conditions For Mechanical / Physical Properties.
Chemical Composition For En-1A Bright Mild Steel
| Chemical Elements | SPECIFIED VALUE FOR EN 1A |
| Carbon (C) | 0.07 To 0.15 % |
| Manganese (Mn) | 0.80 To 1.20% |
| Silicon (Si) | 0.10 % (Max.) |
| Sulphur (S) | 0.20 To 0.30% |
| Phosphorus (P) | 0.07 % (Max.) |
Mechanical / Physical Properties For En-1A Bright Mild Steel
| Physical Properties | SPECIFIED VALUE FOR EN 1A |
| Tensile Strength Tons/Sq.in( Min.) | 32 Tons/Sq.in( Min.) Note: Here we provided maximum value due to unclear. We also provided the actual books page. You can check if you need. |
| Yield Stress Tons/Sq.in( Min.) | Nil |
| Percentage Elongation | 10% |
Chemical Composition For En-1B Bright Mild Steel
| Chemical Elements | SPECIFIED VALUE FOR EN 1A |
| Carbon (C) | 0.07 To 0.15 % |
| Manganese (Mn) | 1.00 To 1.40% |
| Silicon (Si) | 0.10 % (Max.) |
| Sulphur (S) | 0.30 To 0.60% |
| Phosphorus (P) | 0.06 % (Max.) |
Mechanical / Physical Properties For En-1B Bright Mild Steel
| Physical Properties | SPECIFIED VALUE FOR EN 1A |
| Tensile Strength Tons/Sq.in( Min.) | 27 Tons/Sq.in( Min.) Note: Here we provided maximum value due to unclear. We also provided the actual books page. You can check if you need. |
| Yield Stress Tons/Sq.in( Min.) | Nil |
| Percentage Elongation | 10% |
You May Like : IS 7887–1992 Mild steel wire rods for general engineering purposes
En-1, En-1A & En-1B Book Pdf
Chemical Composition of En-1, En-1A & En-1B
Only For You: Chemical Composition And Mechanical/Physical Properties of ASTM A 105
Mechanical / Physical Properties Composition of En-1, En-1A & En-1B
MayBe Helpful For You : IS 10748-2004 Hot-rolled Steel Strip for Welded Tubes and Pipes
En-1, En-1A & En-1B Equivalent specification / Related specification As Per BS 970/1955
| En No. | En1A |
| America | S.A.E. 1113 And A.I.S.I. C1113 |
| France | A.F.N.O.R. 12 MF 4 |
| Germany | Werkstoff No.: 1.0806 Name : 9S27 DIN:1651 |
