Books

ASTM A 305 LF1 Material Chemical Composition, Physical Properties For ASTM A 305 LF1

ASTM A 305 is the American Standard for Carbon and low-Alloy Steel Forgings. And seven Grades Mentioned in this Book. Grade names are LF1, LF2, LF3, LF5, LF6, LF9, LF787.

Here We Shall be going to tell you about ASTM A 305 Grade LF1 Chemical Compositions and Mechanical Properties.

Chemical Composition For ASTM A 305 Grade LF1

Chemical ElementsSUGGESTED VALUE FOR GRADE LF1
Carbon          (C)0.30 %  (Max.)
Manganese  (Mn)0.60 To 1.35 %
Silicon          (Si)0.15 To 0.30 %
Sulphur         (S)0.040 % (Max.)
Phosphorus  (P)0.035 % (Max.)
Chromium  (Cr)0.30 % (Max.)
Nickel        (Ni)0.40 % (Max.)
Molybdenum (Mo)0.12 % (Max.)
Copper      (Cu)0.40 % (Max.)
Columbium (Nb)0.02 % (Max.)
Vanadium    (V)0.08 % (Max.)
Nitrogen    (N)—–

Mechanical / Physical Properties For ASTM A 305 Grade LF1

Mechanical/Physical PropertiesSUGGESTED VALUE FOR GRADE LF1
Tensile strength60-85 Ksi (415-585 Mpa)
Yield strength30 Ksi (205 Mpa) [ Minimum ]
Standard round specimen, or small proportional specimen, min % in 4D gage length Strip specimen for wall thickness 5⁄16 in. [7.94 mm] and over and for all small sizes tested in full section; min % in 2 in. [50 mm]28
Equation for calculating min elongation for strip specimens thinner than 5⁄16 in. [7.94 mm]; min % in 2 in. [50 mm] t = actual thickness in inches48t + 13
Reduction of area, min, %38

Charpy V-Notch Energy Requirements for Standard Size [10 by 10 mm] Specimens

DETAILSSUGGESTED VALUE FOR GRADE LF1
Minimum Impact Energy Required for Average of Each Set of Three Specimens, ft·lbf[J]13 ft·lbf  (18J)
Minimum Impact Energy Permitted for One Specimen only of a Set, ft·lbf[J]10 ft·lbf  (14J)

MayBe Required: Chemical Composition And Mechanical/Physical Properties of ASTM A 105

ASTM A 305 LF1 Material Chemical Composition, Physical Properties For ASTM A 305 LF1

Standard Impact Test Temperature for Standard Size [10 by 10 mm] Specimens

DETAILSSUGGESTED VALUE FOR GRADE LF1
Impact Test Temperature For LF1−20 °F [−29 °C]

Chemical Composition and Mechanical / Physical Properties For

1. ASTM A 305 Grade LF2

2. ASTM A 305 Grade LF3

3. ASTM A 305 Grade LF5

4. ASTM A 305 Grade LF6

5. ASTM A 305 Grade LF9

6. ASTM A 305 Grade LF787

Related Articles

Back to top button

Adblock Detected

If you enjoy our content, please support our site by disabling your ad blocker. we depend on ad revenue to keep creating quality content for you to enjoy free. Disable your ad blocker then reload the site